View PD057VT1_4632591.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P-511-449(V:3)
P D057V T 1 V ers ion : 3.0
T E C HNIC AL S P E C IF IC AT ION MODE L NO. : P D057V T 1
T he content of this information is s ubject to be changed without notice. P leas e contact P V I or its agent for further information. C us tomer*s C onfirmation
C us tomer
Date
FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com
By
P V I*s C onfirmation
C onfirmed B y
P repared B y
T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd. P age:1
P-511-449(V:3)
PD057VT1 Revision History
Rev. Issued Date 1.0 Jun. 07, 2007 2.0 Aug. 11, 2008 Revised Contents New Add Page 16 13.Handling Cautions d) items of 13-1 Delete backlight connector pin pitch Before Connector type JST BHR-03VS-1, PIN No 3 pins, pitch=8.0mm After Connector type JST BHR-03VS-1, PIN No 3 pins
3.0
May 19, 2009
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
P-511-449(V:3)
PD057VT1
TECHNICAL
SPECIFICATION
CONTENTS
NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
ITEM
Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Interface Timing Power On Sequence Optical Characteristics
Handling Cautions
PAGE
1 2 3 4 4 4 5 6 7 7 8 9 10 12 12 16 18 19
Reliability Test Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3
P-511-449(V:3)
PD057VT1
1. Application
This data sheet applies to a color TFT LCD module, PD057VT1. PD057VT1 module applies to OA product, car TV (must use Analog to Digital driving board), which requires high quality flat panel display. If you must use in severe reliability environment, please don't extend over PVI's reliability test conditions.
2. Features
. VGA (640*480 pixels) resolution . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors 262,144 colors . TTL interface
3. Mechanical Specifications
Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 5.7 (diagonal) 640 (R,G,B) 480 262,144 115.20 (H) 86.4 (V) 0.18(H) 0.18(V) Stripe 144.0 (W) 104.6(H) 13.0 (D) (typ.) 211 10 36-LED Anti-glare + EWV film Normally white 6 o'clock [ref. to Note 12-1] Unit inch dot mm mm mm g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4
P-511-449(V:3)
PD057VT1
4.Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
P-511-449(V:3)
PD057VT1
5.Input / Output Terminals
5-1) TFT-LCD Panel Driving Connector type ELCO 08-6210-033-340-800A+, PIN No 33 pins Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Symbol I/O GND I CK I Hsync I Vsync GND R0 I R1 I R2 I R3 I R4 I R5 GND I G0 I G1 I G2 I G3 I G4 I G5 GND I B0 I B1 I B2 I B3 I B4 I B5 GND I ENAB VCC VCC R/L U/D V/Q GND I I I Description GND Clock signal for sampling each data signal Horizontal synchronous signal (neqative) Vertical synchronous signal (neqative) GND RED data signal (LSB) RED data signal RED data signal RED data signal RED data signal RED data signal (MSB) GND GREEN data signal (LSB) GREEN data signal GREEN data signal GREEN data signal GREEN data signal GREEN data signal (MSB) GND Blue data signal (LSB) Blue data signal Blue data signal Blue data signal Blue data signal Blue data signal (MSB) GND Signal to settle the horizontal display position(positive) +3.3V power supply +3.3V power supply Horizontal display mode select signal L Normal ,H Left /Right reverse mode Vertical display mode select signal H Normal ,L Up/Down reverse mode H Normal GND Remark
Note5-1
Note5-2
Note5-1 The horizontal display start timing is settled in accordance with rising of ENAB signal. In case ENAB is fixed "Low",the horizontal start timing is determined as described in 10-2. Dont keep ENAB"High" during operation.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6
P-511-449(V:3)
PD057VT1
Note 5-2 The definitions of U/D & R/L
R/L(PIN 30)= Low, U/D(PIN 31)= High
R/L(PIN 30)= High , U/D(PIN 31)= Low
5-2) LED Backlight driving
Connector type
Pin No 1 2 3
JST BHR-03VS-1, PIN No 3 pins
Description Remark Red Black + NC -
Symbol
Input terminal (Anode) No connect Input terminal (Cathode)
6.Absolute Maximum Ratings:
Parameters Input Voltage Symbol VI Condition MAX.
GND=0V, Ta=25 Unit V Remark Note6-1
Ta=25 -0.3~+4 Ta=25 +3.3V supply voltage VCC 0~+3.6 V Note6-1 CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q
7.Electrical Characteristics
7-1) Recommended Operating Conditions: Item +3.3V Supply Voltage Permissive input ripple voltage Input voltage(Low) Input voltage(High) Symbol VCC VRF VIL VIH Min. Typ. Max. GND=0V, Ta=25 Unit Remark V mVp-p VCC=3.3V V V
+3.0
0 0.7 VCC
+3.3
-
+3.6
100 0.3 VCC VCC
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7
P-511-449(V:3)
PD057VT1
7-2) Recommended Driving Condition for LED Back Light Parameter LED voltage LED current Back Light Power Consumption Symbol VLED ILED PLED Min. Typ. 20 Max. (11) 2640 Unit V mA mW Ta=25 Remark Note 7-1 Note 7-2 Note 7-1 Note 7-3
Note 7-1 The ILED = 20 mA (Constant current) Note 7-2 The LED driving condition is defined for each LED module. (3 LED Serial) The input current= 20 mA*12=240 mA. Note 7-3 PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ..... + VLED-11 * ILED-11+VLED-12 * ILED-12
Anode
Cathode
7-3) Power Consumption Parameters +3.3V Current Dissipation LCD Panel Power Consumption Total Power Consumption
Symbol ICC -
Typ. 67 0.22 -
Max. 100 0.33 2.97
Unit mA W W
Remark Note 7-4
Note 7-4 The power consumption for back light is not included.
8. Pixel Arrangement
The LCD module pixel arrangement is stripe configuration.
640
478 479 480
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8
P-511-449(V:3)
PD057VT1
9. Display Color and Gray Scale Reference
Input Color Data Green 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
Color Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Green Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Blue Brighter Blue (61) Blue (62) Blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Red 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Blue 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic Colors
Red 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
1 1 1 0 0 0
0 1 1 0 0 0
1 0 1 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 1
0 0 0 0 1 0
000000000000111101 000000000000111110 000000000000111111
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9
P-511-449(V:3)
PD057VT1
10. Interface Timing 10-1) Timing Parameters
Note 10-1 : In case of low-frequency, the deterioration of display quality, flicker etc., may occur.
10-2) Display Position in horizontal direction
Display position in horizontal direction is designated by rising timing of ENAB signal.
When ENAB is fixed to "Low", the horizontal display will starts from 144th clock after HS falling.
10-3) Display Position in vertical direction
th Display start position in vertical direction is fixed to the 35 line. The ENAB signal does not relate to Vertical display position.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10
P-511-449(V:3)
PD057VT1
10-4) Timing Diagram
THWh
Tcph Tcwh
*Only when enable terminal is fixed " Low"
Tcwl
Tdhd Tdsu
Horizontal invalid data period
D638 D639 D640
Horizontal invalid data period
THs
Tesu
Twv
TSTV
Vertical invalid data period
DH1 DH2 DH3 DH479 DH480
Vertical invalid data period
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11
P-511-449(V:3)
PD057VT1
11. Power On Sequence
VDD
3.0V
3.0V
Signal*3
0.3V
t1
t2
t3
OFF 10ms 1. 0 2. 0 3. 0 t1 t2 t3 20ms 50ms 1s
Back Light ON 10ms
OFF
12. Optical Characteristics
12-1) Specification: Parameter Symbol Horizontal Viewing Angle Vertical (to 6 o'clock) (to 12 o'clock) CR Tr Tf U% x y =0 Condition MIN. TYP. MAX. Ta=25 Unit Remarks deg deg deg ms ms cd/ % % hrs Note 12-7 Note 12-6 Note 12-2 Note 12-3 Note 12-4 Note 12-5 Note 12-1
70
CR 10
75 70 50 600 15 25 500 85 0.30 0.33 -
30 50 0.34 0.37 3.5 -
65 45
Contrast Ratio Response time Brightness Luminance Uniformity White Chromaticity Cross Talk LED Life Time Rise Fall
At optimized viewing angle
=0 =0/ =0
400 450 80 0.26 0.29 20000
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12
P-511-449(V:3)
PD057VT1
Note 12-1 The definitions of viewing angles are as follow
LED
Note 12-2 The definition of contrast ratio CR =
Luminance at White Pattern Luminance at Black Pattern
Note 12-3 Definition of Response Time Tr and Tf
W hite 100% 90% Brightness 10% 0% Tr Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13
Black
W hite
P-511-449(V:3)
PD057VT1
Note 12-4 All optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure.
Photometer (TOPCON BM-5A or BM-7 fast)
Note 12-5 The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white.
500 mm +/- 50 mm
1/6 2/6
Field = 1 TFT-LCD module
Optical characteristics measuring configuration
1/6
2/6
2/6 1/6 2/6 1/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14
P-511-449(V:3)
PD057VT1
Note 12-6 The "LED Life time " is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25 and ILED = 240mA.
Note 12-7 Cross Talk (CTK) =
YA-YB 100% YA
YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A (Gray Level 31) YA 1/3 1/3 1/3 1/3 : Measuring Point (A and B are at the same point.) 1/3 1/3 Black (Gray Level 0) Pattern B (Gray Level 31, central black box exclusive) YB
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15
P-511-449(V:3)
PD057VT1
13. Handling Cautions
13-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure 13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 13-5) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16
P-511-449(V:3)
PD057VT1
Figure 13-1 the way to peel off protective film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17
P-511-449(V:3)
PD057VT1
14. Reliability Test
No Test Item Test Condition Ta = +80 , 240 hrs Ta = -40 , 240 hrs Ta = +70 , 240 hrs Ta = -30 , 240 hrs Remark
1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature Operation Test 4 Low Temperature Operation Test 5 6 Operation Test Thermal Cycling Test (non-operating)
High Temperature & High Humidity Ta = +60 , 90%RH, 240 hrs (No Condensation) -20 +70 , 200 Cycles 30 min 30 min Frequency: 10 ~ 57 HZ /Vibration Width:0.075mm 2 58-500 Hz / Gravity: 9.8m/s Sweep time: 11 minutes Test period: 3 hrs for each direction of X, Y, Z Gravity: 490m/s2 * 6ms Direction: X, Y, Z 3 times for each direction 150pF 330 Air 15KV Contact 8KV
Vibration Test 7 (non-operating) Shock Test 8 (non-operating) Electrostatic Discharge Test 9 (non-operating)
10 times/point
9 points/panel face
Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria]
In the standard conditions, there is not display function NG issue occurred. (Including line defect, no image) All the cosmetic specification is judged before the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18
P-511-449(V:3)
PD057VT1
15. Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19

▲Up To Search▲

Price & Availability of PD057VT1

	To Download PD057VT1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .